Mad Lab Hybrid - Sand
Mad Lab Hybrid - Sand
Mad Lab Hybrid - Sand
Mad Lab Hybrid - Sand
Mad Lab Hybrid - Sand
Mad Lab Hybrid - Sand

Mad Lab Hybrid - Sand

$629.95
/
Tax included. Shipping calculated at checkout.
  • Be Quick - We have low stock of this item.
  • Backordered, shipping soon
  • Free Shipping Australia-Wide*
  • Fin Set + Wax Included
Recommended Sizing

Model

 Dimensions  Beginners Intermediate Advanced
Mad Lab 7'0  7'0 X 21 3/4" X 3" (50L) Up to 65kg Up to 90kg All Sizes
Mad Lab 7'6  7'6 X 22" X 3" (53L) Up to 75kg Up to 100kg All Sizes
Mad Lab 8'0 8'0" X 22 1/4" X 3" (59L) Up to 85kg All Sizes All Sizes

 

Please Note: These are suggestions only. Previous surf experience, general fitness, confidence and age may effect these slightly.

The Mad Lab is a brand new model for Summer 2024/25.

It combines a hybrid construction style with a fun board template to create a premium soft board designed to suit most skill levels, and perform in a wider variety of wave conditions.

The Hybrid Construction takes favourable elements from both a Performance Fibreglass Boards & an Entry Level Softboard to create a board with a greater focus on performance, whilst still retaining the fun & safe characteristics of a softboard. In short, this allows us to create boards that are a little stiffer & thinner than regular softboards leading to increased speed and responsiveness.

The Funboard template is slightly more pulled in through the nose and tail compared to our Mini Mals, which once again makes it just that little bit more maneuverable for advanced riders or intermediates looking to progress. Similarly, this template is also suited to slightly higher-quality or steeper wave conditions as well.

See below for full details 👇

Note on Comfort and Foam Deck Materials:
Soft surfboards are designed with foam materials, such as EVA foam rails or textured crocodile deck skins, for durability and performance. However, it’s important to note that these materials can sometimes cause rashes or shavings on the inner thighs of riders, especially during extended use.

This is a normal aspect of foam surfboard design and is not a defect. To ensure maximum comfort and prevent irritation, we recommend wearing protective surf gear, such as surf leggings, neoprene pants, or long johns/wetsuits. These are designed not only to keep you warm but also to provide a barrier against potential discomfort while riding.

We hope this helps you have the best experience in the water!

Softlite Shipping & Delivery Policy

Important: Shipping Address Requirements

We do not ship to PO Boxes, Post Offices, or Parcel Collect addresses. Please provide a valid residential address, or alternatively, a work address or a friend/relative's home.

Shipping Costs

  • *Free Shipping: Available for most Australian mainland locations on orders over $100 *Conditions apply: Excluding remote areas listed further below. (Shipping applies to Seconds boards)

  • Flat Rate - Larger Items under $100: $18(e.g., Neo 38" boards, board bags, other large items)

  • Flat Rate - Smaller Items under $100: $10
    (leashes, fins, wax and accessories)

  • *Remote/Rural Areas: May incur a flat-rate fee of $100.
    (E.g., WA Kimberley region, NT, North QLD, and others — see below for details.)
    If this applies, we’ll contact you prior to dispatch.

Dispatch & Delivery Timeframes

  • Orders are usually dispatched within 24–48 hours, depending on current order volume.

  • Delivery time estimates (after dispatch):

    • NSW, QLD, VIC, SA: 2–3 business days

    • WA, NT, TAS, Remote Areas: 5–10 business days

  • No dispatches or deliveries occur on weekends or public holidays.

Courier Services & Tracking

  • Small parcels are shipped via Australia Post or Direct Freight Express, depending on circumstances.

  • Surfboards are shipped via Direct Freight Express.
    Track orders at: https://www.directfreight.com.au (Tracking Number #20746XXXXXX) 

Tracking Note: For remote area deliveries, a third-party courier may be used. In these cases, only the final delivery scan may be visible, which explains the absence of tracking updates on the courier's website.

Once dispatched, you’ll receive tracking info via the email provided at checkout.

Delivery Instructions & Authority to Leave

  • A signature may be required on delivery for board orders.

  • Couriers do not call before delivery.

  • If no one is available to receive the delivery:

    • Please provide an alternative (e.g., work) address, OR

    • Request Authority to Leave (ATL). If ATL is provided, Softlite takes no responsibility once the item is marked as delivered.

Product Availability

All products marked “In Stock” are held in our warehouse. However, in rare cases, inventory errors, freight damage, or other exceptions may cause an item to be unavailable. If this happens, you’ll be notified within 2 business days to arrange an alternative, a backorder, or a full refund.

Remote Area Shipping Notice

Australia is a vast country, and shipping to certain areas costs significantly more. A remote area surcharge of $100 may apply. Examples include:

Western Australia (WA)

  • Broome (6725), Derby, Port Hedland (6721–6728)

  • Kununurra region (6740–6743)

  • Newman, Tom Price (6751–6765)

  • Exmouth (6707), and others

Northern Territory (NT)

  • Katherine (0850–0852), Tennant Creek (0860–0862)

  • Alice Springs (0870–0872), Nhulunbuy (0880–0886)

Queensland (QLD)

  • Agnes Water area (4671–4680)

  • Cape York & Gulf (4871–4876), Cooktown/Weipa/Torres Strait (4878–4895)

South Australia (SA)

  • Coober Pedy, Oodnadatta (5730–5734)

  • Far NW SA (5710–5719)

Tasmania (TAS)

  • Remote regions depending on ferry access (7116+, 7215+, 7304+)

NSW/VIC (Inland/Regional)

  • Lightning Ridge (2386, 2388), Balranald/Moulamein (2716)

  • Mildura fringe (3496–3499)

Off-Mainland Islands

Additional shipping fees apply to islands such as:

  • Rottnest Island, Fraser Island, Magnetic Island, Phillip Island, Whitsundays, Kangaroo Island, Lord Howe Island, Moreton Island, and offshore Tasmanian regions.

Fees depend on item size and quantity. If you’re unsure whether your address qualifies, please contact us at info@softlite.com.au — we’re happy to help.

International Orders

We currently only deliver within Australia.
For international customers:

    This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

    DIMENSIONS & SIZING SUGGESTIONS

    Model

    		 Dimensions  Beginners Intermediate Advanced
    Mad Lab 7'0  7'0 X 21 3/4" X 3" (50L) Up to 65kg Up to 90kg All Sizes
    Mad Lab 7'6  7'6 X 22" X 3" (53L) Up to 75kg Up to 100kg All Sizes
    Mad Lab 8'0 8'0" X 22 1/4" X 3" (59L) Up to 85kg All Sizes All Sizes

    MAD LAB KEY FEATURES

    HYBRID CONSTRUCTION STYLE

    The Mad Lab uses stringered EPS Core, wrapped in fibreglass cloth, wood veneer deck reinforcement & epoxy resin, which is then encapsulated by a traditional Softboard EVA Deck Skin and HD Slick.

    The result is a board that is considerably stiffer which increases the speed you are able to generate from your bottom turn and maintain through turns.

    It also allows us to make them a touch thinner which aids in increasing responsiveness and manoeuvrability.

    CNC SHAPED PERFORMANCE TEMPLATE

    This Model uses a Funboard style which can best be described as an 'in-between' shape between a Short board shape and a Mini Mal. It even has a few characteristics of a fish shape in there...

    Ridden a little bigger it is suitable for beginners, while a slightly pulled in and thinned out nose and tail makes it a pretty rippable board for experienced riders.

    Similarly a high widepoint and generous thickness around the chest will help it in small weak waves, while a little extra nose and tail rocker means it will be manageable in steeper waves too.

    Overall, it is an extremely versatile and suitable for a wider variety of skill levels and wave conditions.

    TEXTURED DECK

    This is probably a little more for comfort and convenience than performance, but we've added a full length, textured EVA deck. This helps to ensure you are never short of traction and only a minimal amount of wax is ever required - a light wax every couple of surfs should do!

    FUTURES FIN SYSTEM

    This ensures it is easy to install and remove fins, and is compatible with other Future Fins, allowing you to change your fins to suit conditions or alter board performance.

    Mad Lab TECHNICAL SPECS

    Core: 25kg High Density EPS, strengthened by Wood Stringer

    Deck: 2 x 6oz Fibreglass Layers + 0.5mm Wood Veneer + textured 3mm EVA Deckskin

    Slick: 1 x 6oz Fibreglass Layers + 3mm XPE Substrate + HDPE Slick

    Rails: Reinforced with 4 x 6oz Fibreglass Layer

    Fins: Futures Fin boxes reinforced with 2 x 6oz Fibreglass layers

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    S
    S.C.

    Amazing board and the delivery and communication were on point👍🏼👍🏼